KM Facility Services

Fire Dampers help prevent transmission of flame where air ducts penetrate fire barriers. Smoke Dampers are intended to be installed in ducts and air transfer openings designed to resist the passage of air and smoke.
According to the National Fire Protection Standard (MFPA) 90A-19.4 and 19.5, 2007 Edition states: “Each damper shall be inspected one (1) year after installation and then the frequency shall be every six (6) years for hospitals.”

According to the U.S. Department of Energy, a dirty HVAC system, especially the coils and filters, can increase overall building energy usage by 30 percent. Lower the costs of your business expenses by calling KM Facility Services for an HVAC system cleaning today. With our years of experience and a thorough cleaning process, you can be assured your system is running at peak performance.

While a business can develop a sterling reputation for the work it does and the service it provides, an unsightly shop or storefront can offset the image you’ve worked hard to establish. Another important benefit of pressure washing comes with the knowledge that taking care of things is much less expensive than replacing them outright. From the outside walls to the sidewalks, a good pressure washing can restore your facility to nearly its original condition because it removes the dirt and gunk that makes the surface look in worse condition than it really is.

What does Weatherproof Coil Shield do? Weatherproof Coil Shield (WCS) is engineered to stop the corrosive effects of coastal salt fog on condenser coils.

How long does WCS last? Conditions vary widely. Winds, tides, and proximity to the ocean are all factors that determine corrosive rates. To help obtain a standard, accelerated weathering chambers are used to determine corrosion rates. In the field, it is recommended that WCS be replaced every year under severe conditions, and less often under milder conditions.

EPA Registered #59682-1
32% active ingredients. Effective against algae, mildew, slime, fungus and bacteria in condensate pans, refrigerators, ice machines and evaporative coolers.

HVAC Surfaces Can Take A Beating
Water, chemicals, contaminants, industrial gases, cleaners -all take their toll on the metals of an HVAC system. Flat surfaces, such as the condensate pan or drain basin, as well as vertical, slanted and curved HVAC surfaces will all eventually rust and corrode in the harsh HVAC environment.

How does cooling tower corrosion occur and what are the effects?

Over the past decades, metal cooling towers have become popular. Tower corrosion may occur in as little as 7 years depending upon water treatment and environmental conditions. Severe rusting to the point of distressed metal of the tower basin and support structure results. Corrosion causes water leaks and increases water consumption. Structural integrity of the tower itself is reduced and gradually performance deteriorates.

Stop clogs in drain pans! PanGuard’s time-released detergents work 24 hours a day, 7 days a week, for up to 6 months to assure free-flowing drains in all your air conditioning units.

The action takes place in our secret non-dissolving polymer core where thousands of tiny pores hold the cleansers. In the presence of water, PanGuard slowly releases these cleansers and wetting agents to keep dirt in suspension. The result is a drain pan that is guaranteed crystal clean for up to six months.